How To Sharpen A Box Cutter

Box cutters are a handy tool to have effectually the home. They arrive easy to open those hard-to-open up boxes, and they can also be used as a last resort if yous need to break down cardboard for recycling purposes. Merely how exercise you go on your box cutter in good working order?

At that place are a few different ways that permit you to sharpen a box cutter blade without having to spend much money. In this article, nosotros will discuss 5 unlike methods on how to sharpen a box cutter!

Tin Box Cutter Blades Be Sharpened?

Box cutter blades can be sharpened, and then you can utilise them for years. The blades are usually made of very tough steel, and the cut edge is not easily damaged past sharpening. Even so, if your box cutter isn't making a make clean cutting through corrugated cardboard or other cloth anymore, information technology might be time to sharpen it.

5 Ways On How To Sharpen A Box Cutter

i. Using a Whetstone

This is the most traditional and common way to sharpen your box cutter. First, you'll need to soak it in h2o for well-nigh an 60 minutes and then wipe the blade across the stone at a xx-degree angle away from your body until desired sharpness is accomplished, or virtually all metal has been removed from that side blade.

Be conscientious not to let the blade go too hot every bit yous are sharpening it, or else your metal will lose its hardness and strength. Also, exist very gentle with this method of sharpening a box cutter considering if you press down on the border while pushing it across the rock, then eventually, all that pressure tin cause chipping on both sides of your pocketknife.

2. Using an Electric Sharpener

Another style to sharpen your box cutter is past using an electric sharpener. It'due south a bit less time-consuming and safer than going at information technology with a whetstone, simply you have to exist careful because some of these sharpeners tin actually accept also much cloth off the blade if used incorrectly, which will upshot in your metal being way too sparse.

iii. Using Sandpaper or Metal Files

This method is probably one of the hardest means to acuminate a box cutter, so nosotros would definitely recommend practicing on some other knife kickoff earlier trying this out on your actual box cutters.

To get-go off, wrap moisture sandpaper around both ends of a broomstick handle until in that location isn't any exposed forest left then secure that with electrical tape or safety bands.

Side by side lay down two strips of 150-dust sandpaper side past side and lay your box cutter flat on top of them. Then, using a smooth motion with your wrist just, button the blade forth the newspaper strips until you experience information technology's sharp plenty or has reached its desired sharpness level (which will exist nearly two swipes).

4. Using a Belt Grinder

Using a belt grinder is probably one of the best ways to sharpen your knife if washed correctly. Not only can you do so in less than v minutes, but this method besides ensures that both sides are uniform, which means there won't exist any wobbling when cutting things from at present on!

Even so, don't just jump into using something similar this without reading upward more about how to properly employ one first because doing and then can result in some pretty dangerous accidents.

5. Using a Waterstone or Oil Stone

Just like with the electric sharpener, be careful of putting too much pressure level on this type of stone when trying to acuminate your box cutter because you lot could end up thinning out your bract if not done correctly! To first off, soak both sides of your Waterstone or oil stone for about twenty minutes, and then place them flat side down on peak of an old towel.

And then secure it in its spot by laying another wet towel over the top and placing something heavy plenty on top to continue everything from moving around while working on it.

After that's all taken care of, pull out one side of the box cutter with 2 fingers beingness extra conscientious not to let it fall while doing so, and and so gently drag the blade across both sides of your rock until y'all feel that sharpness is achieved or desired.

It's of import to know that different types of box cutters accept different blades, so sharpening them with the same verbal method won't e'er piece of work. With these 5 like shooting fish in a barrel ways to acuminate a box cutter, you can rest assured that your blades will be merely as sharp and effective equally before.

Suggested Post:

• How to Remove Glued Downwardly Cement Board: vii Helpful Steps
• How to Find a Stud Backside Tile: 5 Pro Tips

Source: https://captaintool.com/how-to-sharpen-a-box-cutter/

Share this post